EZiclean Air pure 500i Manuel Utilisateur page 18

START-UP
TURNING OFF THE HALO LIGHT
To switch the air quality indicator halo light off and on again, press the RESET button on the control panel.
AUTOMATIC MODE
Press the MODE > Auto selection button to start the Automatic mode. After a 30 second warm-up, EZIclean® Air will automatically
adjust its suction power according to the air quality.
NIGHT MODE
EZIclean® Air pure 500i is equipped with a light sensor. When the light in your room is off, the unit immediately switches to Night
Mode. It reduces the brightness of the air quality indicator halo and minimises the noise level. The Night Mode is only activated when
the unit is previously set to Automatic Mode.
The functions
Connect the device to a 220V
(EU) socket. The control panel
flashes 3 times. The unit goes
into Standby mode.
QUIET MODE
EZIclean® Air pure 500i is equipped with a light sensor. When the light in your room is off, the
unit immediately switches to Night Mode. It reduces the brightness of the air quality indicator
halo and minimises the noise level. The Night Mode is only activated when the unit is previously
set to Automatic Mode.
SUCTION POWER ADJUSTMENT
4 levels of suction power are available. Press the Speed button to scroll through the different
speeds:
Niveau 1 Niveau 2 Niveau 3
Press the POWER
button. The
unit goes into
Automatic Mode.
Niveau 4