Transportation - Health O Meter 402LB Mode D'emploi

TRANSPORTATION

A wheel bracket is included if purchased as model 402LBWH. If purchased as model 402LB an
optional wheel bracket can be purchased separately (Item #55000). Follow these steps to install
the wheel bracket:
Tools Required (not included)
Adjustable wrench or 10 mm wrench
1. Remove the mounting screws that attach the
clamping plate to the wheel bracket.
2. Gain access to the underside of the scale
base by carefully tipping the scale forward
until the pillar is resting on the floor. Position
the clamping plate inside the base by
aligning the holes in the clamping plate and
base.
3. Position the wheel bracket onto the base by
aligning the holes in the wheel bracket with
the holes in the clamping plate.
4. Insert the mounting screws through the
wheel bracket and into the clamping plate.
Using a wrench, tighten the mounting screws
to secure the wheel bracket to the base.
Carefully tip the scale to its upright position.
To transport the scale, tip the pillar backwards until the scale is resting on the wheel bracket.
Carefully move the scale to its new location.
P/N UM402LB REV20220928_web
Wheel
bracket
Clamping plate
Mount wheel bracket here
Close-up view of wheel mounting area
Base
11
Mounting screws
Mounting screws