Technical Information; General Information; Machine Components - MAGNAWELD SMART Serie Mode D'emploi

SMART SERIES

TECHNICAL INFORMATION

1.1 General Information

SMART SERIES is an easy-to-use three-phase industrial synergic inverter MIG / MAG welding machine designed
for severe conditions with Pulse and no Pulse versions. It provides fast and easy use with its user-friendly
interface. It offers excellent welding properties with all solid and cored wires. CC / CV power supply; It allows
you to perform MIG, TIG, MMA welding methods and carbon cutting with a single machine. Thanks to its synergic
feature, welding current and voltage are adjusted automatically after welding parameters are determined. Its
classic and smart modes make it easy for the user to adapt to the synergistic mode.

1.2 Machine Components

1
2
3
4
5
6
7
1- Left Display
Figure 1 : ID 300 - 400 - 500 M SMART / M PULSE SMART Front and Rear View
2- Adjustment Pot
3- Torch Connection
4- On / Off Switch
5- Torch Connection
6- Pole Connection
7- Electrode (+) Pole Connection
8- Right Display
9- Adjustment Pot
www.magmaweld.com
8
9
10
11
12
14
13
15
16
10- Remote Control Torch Socket
11- Power Led
12- Gas Output
13- Data Socket
14- Gas Inlet
15- Heater Socket
16- Energy Socket
17- Mains Cable
Technical Information 11
17
USER MANUAL
EN