Table des Matières
Publicité
INSTALLATION PROCEDURE
INSTALLATION INFORMATION
Installation must be carried out in
accordance with national standards.
The fi xture must only be used when
complete with safety screen. If the
screen is damaged or broken, the fi xture
must not be used. Restore the original
conditions before reusing. The fi xture is
installed under CL II protection standards,
particular care must be taken while
assembling to ensure that exposed metal
parts do not come into electrical contact
with parts of the electrical installation
connected to a protection conductor. This
light fi xture must be installed only for the
use for which it was designed, namely
for the illumination of outdoor spaces.
Any other use must be considered to
be improper and dangerous, and the
manufacturer cannot be held liable for
any damage caused by improper and
unreasonable use.
Handle the products with extreme care as
impact can cause visible damage.
Installation
Check mounting fl ange measurements.
The measurements are as shown in the
drawing (Fig. 1). Unscrew the three screws
(M4) (Fig. 2) at the base of the lighting
fi xture and lift the frame (Fig. 3).
Electrical Connection
Connect the power cable (A - Fig. 4-6-
7-7b). In case of use of RGBW source
connect the DMX cable (B - Fig. 5-6-7-7b
). If the fl exible cord of this appliance is
damaged, it must be replaced only by
the manufacturer, its service agent, or a
qualifi ed person to avoid hazard. Remove
the two plastic caps and the two gaskets
(Fig.8). Secure the fl ange by tightening
two screws -Ø max 6 mm [2/8"] - (Fig. 9)
(Fastening screws not provided). Reinsert
the two gaskets and the two plastic plugs
(Fig.10). Place the lighting fi xture frame
back on the fl ange (Fig. 11).
To adjust the orientation of the light
emission, rotate the frame to the desired
position (Fig.12). Screw the three screws
(M4) to the base (Fig. 13).
·
12
Neri Spa
Guida all'installazione
PHOTOBIOLOGICAL RISK
RISK OF ELECTRIC SHOCK
·
·
Installation guides
Guide d'installation
·
·
Installationsanleitung
Guía de instalación
EN
Publicité
Table des Matières
