Braun Satin Hair 7 Mode D'emploi page 7

A blue LED (2b) comes on when you press one of
the cold buttons (6).
Setting the temperature
When switching on the appliance, the last heat
setting selection is set.
Use the temperature buttons (5) to change the
temperature:
Push the + button to increase the temperature
setting.
Push the – button to reduce the temperature
setting.
Depending on your personal heat sensitivity, type
of hair and moisture level, you can select your
preferred temperature setting. An integrated
thermo sensor ensures maximum heat control.
Cold shot
The cold buttons (6) permit instantly switching to
cold air flow in order to fix a style. Both buttons offer
the same function. Depending on your preferred
way to hold the appliance (A or B) you may press
the cold button that is within comfortable reach.
Regardless of the initial temperature you will instantly
get a cold air flow and the blue LED comes on.
Press one of the cold buttons again to continue
working at the previously set temperature as
displayed by the red LEDs.
Ion technology (only with model HD 785)
The air stream is enriched with millions of active
ions that hug every single hair, reduce frizz and
static charge. The hair can be styled more easily,
restores its moisture level and natural shine.
To ensure maximum flow of ions, use the hair dryer
without attachments or at least, finish styling
without attachments.
Using the styling nozzle
To style hair, push the styling nozzle (7) onto the
front of the appliance and press it firmly until it
snaps into place. The styling nozzle enables you to
direct the air flow towards individual sections of the
hair. Please note that unlike the barrel, the styling
nozzle is heated up by the hot air flow.
Using the diffusor (only with model HD 785)
To create root lift, volume or natural waves, attach
the diffusor (8). Push it firmly onto the air outlet until
it snaps into place (C).
Short to mid-length hair:
To add volume and root lift, gently guide the diffusor
fingers with small circular motions over your scalp.
Long hair:
First dry hair ends by placing them onto the finger
plate. Then carefully lift the hair with the diffusor to
your scalp and hold. Finish off the roots with a gentle
circular motion of the diffusor fingers on your scalp
to add some lift.
Cleaning
Before cleaning, unplug the appliance and let it cool
down.
For cleaning the housing, only use a damp cloth.
Under no circumstances, use aggressive or abrasive
cleaners. Never use pointed objects (e.g. the tail
of a comb) to remove dust or foreign bodies from
inside the appliance. There is a risk of electric shock.
Regularly clean the outside of the protective filter
(1) with a damp cloth (D).
For a thorough cleaning, you may twist the protec-
tive filter to the left and pull it off (E). Clean the
protective filter under running water and allow it to
dry completely. Replace the protective filter and
lock it by turning to the right.
Storage
The hanging loop (3) provides a practical and safe
means of storing your hair dryer.
Disposal
The product contains recyclable electronic
waste. To protect the environment, do not
dispose of it in the household waste, but take
it to appropriate local collection points.
Subject to change without notice.
7