Defrosting; Out Of Operation; Cleaning Of Door Tray - Teka RMF 77810 GBK Mode D'emploi

3.1 DEFROSTING

•
The refrigerator is made based on
the air-cooling principle and thus
has automatic defrosting function.
Frost formed due to change of
season or temperature may also be
manually removed by disconnection
of the appliance from power supply
or by wiping with a dry towel.

3.2 OUT OF OPERATION

•
Power failure: In case of power
failure, even if it is in summer, foods
inside the appliance can be kept for
several hours; during the power
failure, the times of door opening
shall be reduced, and no more fresh
food shall be put into the appliance.
•
Long-time nonuse: The appliance
shall be unplugged and then
cleaned; then the doors are left
open to prevent odor.
•
Moving: Before the refrigerator is
moved, take all objects inside out,
fix the glass partitions, vegetable
holder, freezing chamber drawers
and etc. with tape, and tighten the
leveling feet; close the doors and
seal them with tape. During moving,
the appliance shall not be laid
upside down or horizontally, or be
vibrated; the inclination during
movement shall be no more than
45°.
IMPORTANT:
The appliance shall run continuously once
it is started. Generally, the operation of the
appliance shall not be interrupted;
otherwise, the service life may be impaired
3.3 CLEANING OF DOOR
TRAY
•
According to the direction arrow in
the figure below, use both hands to
squeeze the tray, and push it
upward, then you can take it out.
•
After washing the tray having been
taken out, you can adjust its
installing height in accordance with
your requirement.
EN-18