Hkoenig SWRC110 Manuel D'instructions page 26

WIFI APP CONNECTING INSTRUCTION
Step 6: After completing step 5, if robot is connected and log in the cloud service successfully, the app
will return to Devices page. Then you can see the connected robot on the devices list .
Note: If error occurs, you can turn off the switch of robot, quit the app. Then turn on the robot again
and press and hold the
the robot, then retry the connection from Step 1 to 5.
5. Check status of the Cleaning Robot
A. You can check the robot status under the devices list, including robot connect status(online /
offline), work status(working, Pause, charging etc.), and battery level.
B. You can press " + " to connect another robots, or press "-" to disconnect your robot from app. You
can refresh the checking of robot status by pulling down the page.
"HOME" button on robot, until its LED panel displays " SUCC " to unbind