Hkoenig SWRC110 Manuel D'instructions page 11

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
d.
In the working status, the robot will return to charging station automatically and LED panel will show
"
" when battery power is low .
For extending battery life:
a.
Before first use, charge the robot for 12 hours.
b.
Charge the robot as soon as battery power is low.
c.
The robot will return to charging station automatically when it accomplishes cleaning or battery
power is low.
d.
If the robot is not to be used for a long time, fully charge the battery before use, turn the power off,
remove and store it in a cool, dry place.
e.
If the robot is not to be used for more than 3 months, charge the robot for 12 hours, turn the power
off, remove and store it in a cool, dry place.
2. Starting up / Standby / Sleeping / Power off
A.
Starting up
a. Make sure the power switch is on.
b. In standby mode, press "
Note: If robot is in sleep mode, press "
up the robot from sleep mode, then press "
B.
Standby
Standby means robot has its power switched on, waiting for the user‟s operation. It can be changed
to standby mode by one of the following methods:
a. During robot cleaning, press "
b. During robot cleaning, press ON/OFF button on remote control to power off the robot.
C.
Sleep
In sleep mode, the robot can only be waken up from "
remote control. In order to save power, you can turn the robot into sleep mode from standby mode
via either of the following methods:
a. Press "
b. Robot will automatically enter sleep mode if no command is received for more than 60 seconds.
" on main body or ON/OFF on remote control to start cleaning.
" on main body and hold it for 3 seconds.
" on main body or ON/OFF on remote control to wake
" again, the robot will start cleaning automatically.
" on main body to enter standby mode.
" button on main body or ON/OFF on

Publicité

Table des Matières
loading

Table des Matières