International Warranty - Bell & Ross BR-X1 CHRONOGRAPH Notice Technique

th
4 press on Tappet P1: stops measuring time
th
5 press on Tappet P2: resets and stops the chronograph
IMPORTANT
*
Quickset date setting.
date setting (crown in position 1) MUST NOT UNDER ANY CIRCUMSTANCES be carried out
between the times of 9 P .M. (21:00) and 3 A.M. (03:00).
Magnetic fields. Magnetic fields can adversely affect the accuracy of your watch. Also, we
would recommend that you avoid placing your watch near electronic devices that may gener-
ate large magnetic fields (radio, smartphone, television, computer, tablet, loudspeakers etc.).
Water resistance. Once the watch is set, to ensure perfect water resistance, push the
crown back to position 0. Never operate the crown underwater.
Note: The 4 slotted screws (E) mount the bezel to the case and ensure the water resistance of
the watch. To benefit from the Bell & Ross warranty, these screws must never be unscrewed.
MAINTENANCE
After being immersed in seawater, it is recommended to carefully rinse off the watch and
strap with fresh water. It is also recommended to have the water resistance of your watch
checked every two years.

INTERNATIONAL WARRANTY

To benefit from your 2-year international warranty, your card must be activated at the
time of purchase by your approved Bell & Ross point of sale, and presented every time an
intervention is performed. You can now access the digital version of this card and all the
information relating to your watch by scanning the QR code or visiting:
www.bellross.com/warranty
To ensure a service that meets the brand's exacting standards, any servicing of your
watch must be carried out by the Bell & Ross service centre or a watchmaker approved
by Bell & Ross.
As with all mechanical watches with a date function, quickset
5
A. Minute hand
B. Chronograph second
hand
C. Hour hand
D. Chronograph minute
hand
E. Case attachment screw
(NEVER UNSCREW)
F. Date
G. Second hand
H. Screwed Crown
P
. Tappet P
1
1
P
. Tappet P
2
2
0. Unscrew the crown
(anticlockwise)
1. Wind the mechanism
manually (clockwise)
2. Set the date
(counterclockwise)
3. Set the time (either
clockwise or
counterclockwise)