Alarm Setup - IDK BC-838 Plus Mode D'emploi

Press the [SET] key to for
3 seconds
NOTE :
• Press the [CH+] or [CH-] key as forward or backward for VOL LOCK and
VOL UNLOCK.
• Press the [SET] key to confirm and store the selected status of Volume Lock/
Unlock.
• Press the [ESC] key for escape and the selected status will not be stored.
RESET ALL SETUP
The BC-838 Plus provides the reset all setup to let you back to internal setup to
the factory default setting. Simply follow below steps:
1. Press the [SET] key to for 3 seconds and the LCD will be shown CODE SETUP .
2. Press & release the [CH+] key for six (6) times to view the RESET ALL page.
3. Upon the LCD shown as RESET ALL , press the [SET] key once.
4. The LCD shown as CONFIRM , press the [SET] key to confirm and the
BC-838 Plus will back to initial reset.
Press the [SET] key to for
3 seconds
NOTE : Press the [ESC] key for escape and back to normal operation mode.

ALARM SETUP

The BC-838 Plus provides the built-in real time alarm setup to let you alert to
special moment. You will never miss it. Simply follow below steps:
To Activate Alarm Setting
1. Press the [SET] key to for 3 seconds and the LCD will be shown CODE SETUP .
2. Press & release the [CH+] key for seven (7) times to view the ALARM SET
page.
3. Upon the LCD shown as ALARM SET , press the [SET] key once.
4. The LCD shown as ALARM ON , press the [SET] key to confirm and shown
as ALARM 12:40
5. The HOUR of LCD will blinks, press the [CH+] or [CH-] key to select desired
HOUR.
6. Press the [SET] key once, the MINUTE of LCD will blinks, press the [CH+] or
[CH-] key to select desired MINUTE.
7. Press the [SET] key once, the LCD shown as SUCCESS and back to normal
operation and the indicator of "ALARM" will be displayed.
8. The alarm is automatically activated after the setting procedure.
Press the [SET] key to for
3 seconds
Press & release the [CH+] key
for five (5) times
Press the [SET] key
Press & release the [CH+] key
for six (6) times
Press & release the [CH+] key
for seven (7) times
Press the [SET] key to confirm
Press the [SET] key once
Press the [CH+] key to select
Press the [SET] key once
Press the [SET] key to confirm
Press the [SET] key once
Press the [CH+] or [CH-] key to
select desired Hour / Minute
18