IDK BC-838 Plus Mode D'emploi page 15

6. Press the [SET] key once, the LCD shown ALL TV —001 and the BC-838 Plus
is now performed the auto search count from the code you set up before, for
example TV 001 ... and so on.
7. If the TV turns off. This indicates that the BC-838 Plus is now set to your TV.
8. Press the [SET] key to save the working code. The LCD shown as SUCCESS
and the BC-838 Plus is now ready to operate your TV.
9. To check the code, press the [POWER] key to ON position. Press the
[CH+/-], [VOL+/-
Steps 1-11.
10. In any cases if you need to leave the Auto All Search, just press the [ESC]
key to exit, the LCD will be shown as EXIT and back to normal operation
mode.
11. To program other equipment, repeats the Steps 1-11 for your VCR, DVD, CD,
ASAT, DSAT, CBL and or your second TV or VCR or SAT, etc..
Press the [SET] key to for
3 seconds
SETTING UP BY GROUP SEARCH
This Group Search method checks all its preprogrammed codes to find the code
that will operate your equipment. This method may take a few minutes.
1. Make sure your TV is switched on (not on standby).
2. Aim the BC-838 Plus at your TV.
3. Press the [SET] key to for 3 seconds and the LCD will be shown CODE SETUP .
4. Press & release the [CH+] key once to view the CODE SRCH page.
5. Upon the LCD shown CODE SRCH , press the [SET] key once, the LCD shown
as TV ALL SRCH .
6. Press [CH+] to select the group for brand of the Group Search .
Group
Group 1 Medion, Lifetec, Magnum,
Micromaxx, Microstar,
Tevion, Innovation, TCM,
General, Technic, Videon
Group 2 Philips, Erres, PYE, Philico,
Radiola
Group 3 Sony, Akai, Panasonic, JVC,
Sharp, Toshiba, Daewoo
Group 4 Thomson, Brandt
Group 5 Telefunken, Saba, Baird,
Normende, Ferguson
Group 6 Grundig, Blaupunkt
Group 7 Nokia, Finlux, ITT
7. Once you selected, press the [SET] once, the LCD shown as GROP 1 TV—001
and the BC-838 Plus is now performed the Group Search count from the
code you set up before, for example TV 001 ... and so on.
8. If the TV turns off. Press the [SET] key to save the working code. The LCD
shown as SUCCESS and this indicates that the BC-838 Plus is now set to
your TV.
9. To check the code, press the [POWER] key to ON position. Press the
[CH+/-], [VOL+/-
Steps 1-9.
10. In any cases if you need to leave the Group Search, just press the [ESC] key
to exit, the LCD will be shown as EXIT and back to normal operation mode.
11. To program other equipment, repeats the Steps 1-9 for your VCR, DVD, CD,
ASAT, DSAT, CBL, and or your second TV or VCR or SAT.
] , , and other applicable keys. If no function, repeats
Press & release the [CH+] key
Press the [SET] key to save
the working code
TV
] , , and other applicable keys. If no function, repeats
Press the [SET] key once
Press the [SET] key once for
AUTO SEARCH
VCR
Medion, Lifetec, Videon,
Micromaxx, Microstar,
Tevion, Innovation, TCM,
General, Technic
Philips, Philico
Sony, Akai, Panasonic, JVC,
Sharp, Toshiba, Daewoo
Thomson, Brandt
Telefunken, Saba,
Normende, Ferguson
Grundig, Blaupunkt
Nokia, Finlux, ITT
SAT
Medion, Lifetec,
Micromaxx, Glaxis,
Microstar, Innovation
Philips, Philico
Pace, Echostar
Thomson, Brandt,
Universum
Telefunken, Saba,
Normende, Ferguson
Grundig
Nokia, Finlux, ITT,
Hirschmann
14