Table des Matières
Publicité
6.0 DECLARATION DE CONFORMITE CE
We:
ABB Inc.
18321 Swamp Road
Prairieville, LA 70769
declare under our sole responsibility that the products:
PS35 & PS45 Pneumatic Level switch are in conformity with the following standards:
ATEX Notified Body for EC Type Examination Certificates (94/9/EC):
Intertek Testing & Certification Limited
Intertek House, Cleeve Road,
Leatherhead,
Surrey, KT22 7SB
Notified Body:
ATEX Notified Body for Quality Assurance:
DET Norske Veritas Certification AS
Veritasveien 1
1322 Hovik
Norway
Notified Body:
The technical documentation required to demonstrate that the product meets the requirements
of the Low Voltage Directive has been compiled by the signatory below and is available for
inspection by the relevant enforcement authorities. The CE mark was first applied in 1999.
The products described above comply with the essential requirements of the directives
specified.
Signed:
Authority:
_________________________
Date:
September 19, 2014
18321 Swamp Road
Prairieville, LA 70769
ABB
EC DECLARATION OF CONFORMITY
0359
Mechanical: II 2 G c IIB T6 Gb (-18°C ≤ Tamb ≤ +80°C)
Certificate:
ITS14ATEX18124X
Standards:
EN1127, EN13463-1, EN13463-5
0575
PQA Certificate:
___________
Telephone: 225-673-6100
Fax# 225-673-2525
DNV-2007-OSL-ATEX-17337Q
ABB Inc.
Manuel d'utilisation | Interrupteur de jauge de niveau magnétique PS45 7
PS45-0311-1 Rev. NC
Internet:
www.abb.com/level
Publicité
Table des Matières
