gdw 0643 Instructions De Montage page 5

Citroën C15
1985 - 1997
Ref. 0643
Fitting instructions
1) Remove the spare wheel.
2) Remove the rubbers out of the sides at the back of the chassis beams. Place in these 4 continuous holes
the heightened washers, which are enclosed, and insert the bolts.
3) Place the tow bar with points (A) in between the 2 towing rings (fitting the holes) and with points (B) on
the just placed bolts. Insert at points (A) the washers  27x13x2,5 mm in the holes of the towing rings
and place the washers  40x35x12x4 mm on the outside. Insert the necessary bolts and nuts and tighten
everything firmly.
4) Install the (*) and also tighten firmly.
5) Reinstall the spare wheel.
Composition
1 tow bar reference 0643
1 flange ball 50T
2 bolts M16x50
2 safety washers M16
2 nuts M16
1 security shackle 50T
2 bolts M12x30
2 safety washers M12
2 nuts M12
4 bolts M10x90
4 safety washers M10
4 nuts M10
4 heightened washers 50x50x56mm
6 washers ø24x13x2,5mm
2 washers ø40x35x12x4mm
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*)
(*)
(*)
(*)
(*)
(A)
(A)
(A)
(B)
(B)
(B)
(A)
(A-B)
(A)
All bolts and nuts : quality 8.8