TUNER
TUNER
Activating/deactivating TA Standby
Reception
The unit is in standby to switch to Traffic
Announcement (TA) if available. (The TP indicator
lights up.)
• If the TP indicator flashes, tune into another
station providing RBDS signals.
To deactivate TA Standby Reception: Press [TP].
(The TP indicator goes off.)
• The volume adjustment for Traffic Announcement
is automatically memorized. The next time the
unit switches to Traffic Announcement, the
volume is set to the previous level.
SiriusXM® RADIO
SiriusXM® RADIO
(Only for KW-V40BT Region 1/KW-V20BT Region 1/KW-V200BT/KW-V10 Region 1/KW-V100)
(Only for KW-V40BT Region 1/KW-V20BT Region 1/KW-V200BT/KW-V10 Region 1/KW-V100)
Everything worth listening to is on SiriusXM, getting
over 130 channels, including the most commercial-
free music, plus the best sports, news, talk and
entertainment. To start listening to the SiriusXM®
Satellite Radio, a SiriusXM Connect Vehicle Tuner
(commercially available) and subscription are
required. For more information, visit www.siriusxm.
com.
Before operating, connect the SiriusXM Connect
Vehicle Tuner (commercially available) to the
expansion port on the rear of the unit. (Page 52 )
Activating subscription
1
Check your Radio ID.
Radio ID is labeled on the casing of the SiriusXM
Connect Vehicle Tuner or the bottom of the
SiriusXM Connect Vehicle Tuner unit.
• You can also display the Radio ID on the
screen by tuning in to Channel 0.
2
Activate the SiriusXM Connect Vehicle
Tuner using one of the two methods
below:
• For users in U.S.A:
– Online: Go to www.siriusxm.com/
activatenow
– Phone: Call 1-866-635-2349
• For users in Canada:
– Online: Go to www.xmradio.ca and click on
"ACTIVATE RADIO" in the top right corner
– Phone: Call 1-877-438-9677
3
Select "Satellite" as the source.
(Page 8)
SiriusXM Connect Vehicle Tuner starts updating
all the SiriusXM channels.
Listening to the SiriusXM® Radio
Indications and buttons on the source
control screen
1 2
3
4
SiriusXM® radio reception information
1 Band
2 Preset number
3 Channel number/Channel name
4 Signal strength indicator
5 Category name
6 Preset list
5
6
ENGLISH
23