Troubleshooting; Maintenance; Service; Accessories - Biesemeyer T-Square Système commercial de guide Type 2 Manuel D'utilisation

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

For assistance with your machine, visit our website at www.DeltaMachinery.com for a list of service centers or call the

Biesemeyer

help line at 1-800-223-7278

To reduce the risk of injury, turn unit off and disconnect it from power source before installing and

removing accessories, before adjusting or when making repairs. An accidental start-up can cause injury.

KEEP MACHINE CLEAN

Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER

use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.

Wear certified safety equipment for eye, hearing and respiratory protection while using compressed air

LUBRICATION & RUST PROTECTION

Apply household floor paste wax to the machine table, extension table or other work surface weekly. Or use a commercially

available protective product designed for this purpose. Follow the manufacturer's instructions for use and safety.

To clean cast iron tables of rust, you will need the following materials: a sheet of medium Scotch-Brite™ Blending Hand Pad, a can

of WD-40® and a can of degreaser. Apply the WD-40 and polish the table surface with the Scotch-Brite pad. Degrease the table,

then apply the protective product as described above.

REPLACEMENT PARTS

Use only identical replacement parts. For a parts list or to order parts, visit our website at www.DeltaMachineryParts.com You

can also order parts from your nearest factory-owned branch, Authorized Warranty Service Center or by calling Technical Service

Manager at (800) 223-7278 to receive personalized support from one of our highly-trained representatives.

SERVICE AND REPAIRS

All quality tools will eventually require servicing and/or replacement of parts. For information about Biesemeyer

owned branches, or to locate an Authorized Warranty Service Center, visit our website at www.DeltaMachinery.com or call

our Technical Service Manager at (800) 223-7278. All repairs made by our service centers are fully guaranteed against defective

material and workmanship. We cannot guarantee repairs made or attempted by others. By calling this number you can also find

answers to most frequently asked questions 24 hours/day.

You can also write to us for information at Biesemeyer, 99 Roush Street Anderson, SC 29625 - Attention: Technical Service Manager.

Be sure to include all of the information shown on the nameplate of your tool (model number, type, serial number, date code, etc.)

Since accessories other than those offered by Biesemeyer

use of such accessories could be hazardous. For safest operation, only Biesemeyer

should be used with this product.

A complete line of accessories is available. Please visit our Web Site www.DeltaMachinery.com for a catalog or for the name of

your nearest supplier.