Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
LADDER COLUMN
1. Position the Bottom Ladder Section and
Middle Ladder Section as shown in figure 20.
The welded U bracket faces the tree when
fully assembled.
The Bottom Ladder Section has no welded
sleeves.
2. Slide the Ladder Sections together, line up
the bolt holes and use one
lock nut
to secure each side (see figure 21).
WELDED
SLEEVES
LADDER COLUMN (continued)
3. Slide the completed Bottom and Middle ladder sections into
the Top Ladder Section as shown in figure 22.
4. Secure using two
1 3/4" bolts and lock nuts.
BOTTOM LADDER SECTION
(PN 82074.13)
1 3/4" bolt and
(See figure 23)
WELDED
U BRACKET
MIDDLE LADDER
SECTION
(PN 82074.12)
1 3/4" BOLTS, LOCK NUTS -
WRENCH TIGHTEN
23
Hardware Needed
1/4"-20 - 1 3/4" Bolt
1/4"-20 - Lock Nut
MIDDLE
LADDER
SECTION
(PN 82074.12)
1 3/4" BOLTS, LOCK NUTS -
WRENCH TIGHTEN
21
- 4
- 4
WELDED
U BRACKET
COMPLETED
PLATFORM / SEAT
ASSEMBLY
20
BOTTOM
LADDER
SECTION
(PN 82074.13)
22
PG 9
Publicité
Table des Matières
