Summit SU82083 Mode D'emploi page 6

5
FRONT ARMREST BAR
(PN 82074.4)
Hardware Needed
1/4"-20 - 1 1/2" Bolt
1/4"-20 - 1 3/4" Bolt
9
FRONT SEAT
SUPPORT BAR
(PN 82074.6)
PG 6
LEFT ARMREST BAR
(PN 82074.5L)
- 4 1/4"-20 - Lock Nut
- 6
PLATFORM (continued)
5. Position the Left Armrest Bar as shown in figure 5.
6. Slide the bar down on top of the Rear Seat Support
and line up the holes. Secure using one
and lock nut as shown in figure 6. Leave these hand
tight for now.
1 1/2" BOLT, LOCK NUTS -
HAND TIGHT
7
7. The Front Armrest Bar attaches next. Slip it into
the end of the Left Armrest Bar and align the lower
hole to the Platform as shown in figure 7.
8. Secure using one
upper location and one
the lower location. Leave these hand tight for now.
See figure 8.
9. Repeat Steps 3 - 8 for the other side.
1 1/2" | 2 1/4" BOLTS, LOCK
NUTS - HAND TIGHT
- 10
SEAT SUPPORT
1. Position both Front Seat Support Bars as shown
in figure 9.
2. Position the bars between the welded on U
brackets and secure using one
nut per side as shown in figure 10. Leave these
hand tight for now.
1 3/4" BOLTS, LOCK NUTS -
HAND TIGHT
1 1/2" bolt
6
1 1/2" bolt and lock nut at the
2 1/4" bolt and lock nut
8
1 3/4" bolt and lock
10
www.summitstands.com
at