Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4
TOOLS REQUIRED
Tools
•
7/16" Wrenches and / or Socket / Ratchet
•
1/2" Wrenches and / or Socket / Ratchet
- Assembly can be made easier by the use of a powered ratchet or drill with socket adapter (take care not to overtighten
when using power tools to assemble)
- It is recommended that all bolts be sorted by thread count / length prior to assembly.
- Assemble entire product before fully tightening any bolts / lock nuts.
DO NOT OVER-TIGHTEN the bolts and nuts to the point that the tubing becomes deformed or bent.
5
ASSEMBLY
PLATFORM
1. Position the Left and Right Platform sections
as shown in figure 1.
2. Slide the sections together and secure using
three
3/4" bolts and lock nuts
figure 2.
3/4" BOLTS, LOCK NUTS -
WRENCH TIGHTEN
3
LEFT
as shown in
PLATFORM
(PN 82074.2L)
2
REAR SEAT
SUPPORT
(PN 82074.3)
Hardware Needed
5/16"-18 - 3/4" Bolt
- 3
5/16"-18 - Lock Nut
- 3
1/4"-20 - 1 1/2" Bolt
- 4
RIGHT
PLATFORM
(PN 82074.2R)
3. Flip the Platform Assembly over. Position one of
the Rear Seat Supports over the rear U Bracket as
shown in figure 3.
4. Secure using one
shown in figure 4. Leave this bolt hand tight for
now.
1/4"-20 - 1 3/4" Bolt
1/4"-20 - 2 1/4" Bolt
1/4"-20 - Lock Nut
1 3/4" bolt and lock nut
1 3/4" BOLT, LOCK NUTS -
HAND TIGHT
- 2
- 2
- 8
1
as
4
PG 5
Publicité
Table des Matières
