Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
11
SEAT SUPPORT
(PN 82074.7)
1 1/2" BOLTS, LOCK NUTS -
HAND TIGHT
13
CROSS TENSION BAR
(PN 82074.8)
Hardware Needed
1/4"-20 - 2 1/4" Bolt
1/4"-20 - Lock Nut
14
GUNREST
BAR
(PN 82074.9)
SEAT SUPPORT (continued)
3. Attach the Seat Support next. (see figure 11) Position the rear inside the
welded brackets on both Rear Seat Support Bars.
4. Pivot the two Front Seat Support Bars up into the bracket on the Seat
Support.
5. Secure all four locations using
figure 12. Leave these hand tight for now.
- 4
- 4
1 3/4" bolts and lock nuts
1 3/4" BOLTS, LOCK NUTS -
HAND TIGHT
6. The Cross Tension Bars are installed next.
Position one between the back of the Front Armrest
Bar and the holes on the front of the Platform
shown in figure 13.
7. Secure using two
1 1/2" bolts and lock
8. Repeat Steps 6 - 7 for the other side.
GUNREST
1. Position the Gun Rest as shown in figure 14.
2. Line up the four bolt holes and attach using
1/4" bolts with lock
nuts. Leave these hand tight
for now. (see figure 15)
2 1/4" BOLTS, LOCK NUTS -
HAND TIGHT
15
as shown in
12
nuts.
2
PG 7
Publicité
Table des Matières
