Adjustment; Technical Characteristics - Fagor BC-100 Manuel D'utilisation

interior 21/6/05
1. INTRODUCTION
Before using the scales for the first time,
read this manual carefully to guarantee
correct functioning and extend the life of the
appliance.
2. PRODUCT DEFINITION (FIG. 1)
1. Bowl
2. Platform
3. I/O button
4. Kg/g/Lb button
5. Tare button
6. Display
7. Battery compartment
Interference suppression: The
interference of this appliance has been
suppressed in accordance with interference
suppression standards.
Electromagnetic compatibility: This
appliance complies with the CEM standards
of electromagnetic compatibility.

3. TECHNICAL CHARACTERISTICS

1. Maximum weight capacity:
2. Division: 2g/0,05 oz
3. Convertible kg/g/lb
4. Power source: One 9V alkaline battery
4. ICON DISPLAY (FIG. 2)
a) Battery low indicator
b) Negative tare
c) Tare function active
d) Zero weight/tare inactive
e) Weight displayed in kg
f) Weight displayed in gr
g) Option for other units
h) Weight displayed in lb
20:44 Página 6
EN
5 kg/11 lb
7

5. ADJUSTMENT

A. Insert the 9V alkaline battery in the
battery compartment (7) on the
underside of the scales.
B. Place the scales on a dry, flat, solid
surface, making sure they are firmly
positioned. Then place the bowl on the
platform (2).
6. FUNCTIONING
1. Press the button to switch on the
scales.
2. The display will come on, showing all
the icons.
3. Press the button to select the
unit of weight: kilos, grams or pounds.
a) weight in kg
b) weight in gr
c) weight in lb
4. Make sure the scales show a weight of
zero before weighing. If they do not show
zero, press the tare button (5).
5. The scales are now ready for use.
Always place the article to be weighed
in the centre of the bowl.
6. Wait for the display to become stable.
The display reading will show the
correct weight of the article, e.g.
7. TARE function
You can continue to weigh further
articles without removing the article you
have already weighed from the bowl.
Just press the button once
before placing the additional article in
the bowl, to set the tare function to zero