Speed Preselection - Hilti AG 125-19SE Mode D'emploi

3 Description
3.1 Overview of the product
3.2 Intended use
The product described is a hand-held electric angle grinder. It is designed for cutting and grinding metal and
mineral materials, brushing, sanding and for hole cutting, all without use of water.
The tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its rating plate.
• The power tool may be used for cutting, slitting and grinding mineral materials only when equipped with
the corresponding guard and front cover.
• A dust removal hood together with a suitable Hilti vacuum cleaner must be used for working on mineral
materials such as concrete or stone.
3.3 Items supplied
Angle grinder, side handle, standard guard, front cover, clamping flange, clamping nut, wrench, operating
instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group | USA: www.hilti.com
3.4

Speed preselection

The product features steplessly adjustable speed preselection within the 2800 to 11500/min speed range.
3.5 Starting current limiter
The electronic starting current limiter reduces the starting current drawn to prevent the line fuse from tripping.
This prevents abrupt start-up of the product.
22 English
1
@
;
=
%
&
(
)
+
§
/
:
∙
$
£
|
Spindle lockbutton
On/off switch
Air vents
Speed adjustment thumbwheel
Vibration-absorbing side handle
Wrench
Clamping nut
Kwik lock clamping nut (optional)
Abrasive cut-off-wheel / abrasive grinding
wheel
Clamping flange with O-ring
Guard
Spindle
Quick locking system
Guard release button
Threaded bushing for handle
2143513
*2143513*