Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
(e) Remove taillights – Remove cover from passenger side panel. Using 8 mm socket with extension remove (3) hex nuts that hold the taillight from behind of the panel,
per side. Remove taillights by disconnecting the wiring harness.
(f) Use plastic trim tools to remove the fascia starting at the outer edges near the
wheel wells and gently pull the fascia. Disconnect wiring Harness while removing
the fascia.
©2022 Horizon Global™ Corp - Printed in Mexico
2. Remove bumper beam – Use 18 mm socket remove (4) M12 flange nuts from
bolts of bumper beam on end panel, per side. Remove bumper beam and return
to vehicle owner. *Tow eye will be inoperative after bumper beam removal.
Please use chain ring on the hitch as alternative.
Sheet 7 of 27
76925NP
06-24-22
Rev. A
Publicité
Table des Matières
