Puky F20 - F1L Mode D'emploi page 5

All manuals and user guides at all-guides.com
1. Introduction
Congratulations for purchasing this PUKY
go-cart. You have bought a product that
will give your child pleasure and fun. The
information in this user manual will help you
operating the new go-cart in a safe way
and inform you how to do service work. If
you have any questions or encounter any
problems please contact your local dealer
or visit our web site at: www.puky.de.
2. Getting started with your go-cart
Your local dealer assembled the
go-cart, so it is ready for use and
does not require any adjustment
procedures. Ask your local dealer
if he had performed a safety check.
3. Parent's responsibilities
This go-cart was manufactured in
compliance with European Norm EN
71, and carries the CE symbol.
If your child uses the go-cart for the
purpose it was designed for, there
will be only a minimum risk of hazard
when riding the go-cart. Remember,
children's natural playing needs
and their temperament may cause
unforeseen situations which can be
dangerous and result in serious in-
juries. This is not the liability of the
manufacturer. So, do teach your chil-
dren how to use the go-cart properly
and direct attention to potential risks.
User Manual
4. Warnings
It is essential that closed shoes are
worn when using the go-cart. Do not
wear loose clothing, as this might be
damaged by the rear wheels. Long
shoelaces could get caught up in the
pedals. When reversing quickly, the go-
cart could tilt backwards if the brakes
are applied sharply. If children use the
go-cart, care should be taken that they
are nowhere near stairs, hilly terrain,
swimming pools and other water. Sur-
rounding stairs and steps should be
suitably cordoned off to prevent chil-
dren ascending or descending these.
5. Use
Please use the go-cart in a suitable play area
or safe environment. The go-cart does not
correspond to German Road Safety Stand-
ards and must not be used on public roads.
The total loads permissible for this go-cart are
as follows:
F 20L = 30 kg,
F 50 to F1 = 50 kg
6. Care and maintenance
Following the "DRIVING IN PERIOD" of sev-
eral hours, please check the chain tension
and, if necessary, adjust this. To adjust the
chain, the chain guard does not need to be
removed (apart from with the GF 20). All you
have to do is loosen the nuts on the gear ec-
centric discs on both sides of the gears and
the disc evenly turned backward. For the
GF 20, you must remove the chain guard,
the nuts on the gear bearing clamps slightly
5
GB