Trouble Shooting - Garland ALABAMA 18 E Manuel D'instructions

English

9. TROUBLE SHOOTING

Depending on the symptons that you may observe, you will be able to know the probable cause of the problem
and how to solve the problem.
Problem
The engine stops when started
The chain does not move
Poor cutting performance
Chain heats up
Cause
Not connected to the mains.
Chain brake activated.
Cable damaged.
Switch damaged.
Brushes worn out.
Chain brake activated.
Chain not sharp enough.
Chain tension.
Bad chain lubrication.
44/148
Action
Connect to the mains.
Check chain brake and remove if necessary.
Send machine to after sales service. Do not
repair cable with insulating tape.
Send machine to after sales service.
Send machine to after sales service.
Check chain brake and remove if necessary.
Sharpen chain.
Tense the chain.
Check oil level and refill if necessary.