Installation Steps
Insert (2) screws and washers through the hood shield and into the hood. Securely tighten.
7
Turn both of the hood bumpers counter clockwise 1 1/2 turns.
8
Apply (4) bump ons to surface of hood.
10
10
Care and Cleaning
•
Wash only with mild soap & dry with a clean cloth.
© 2021 by MacNeil IP LLC
NOTE: Actual application may vary slightly from illustrations.
DO NOT OVER TIGHTEN
9
Page 3 of 3
hood shield
washer
self tapping
screw
hood seal / gasket
Close Hood.