Endress+Hauser iTEMP TMT180 Bref Instructions page 9

Installation
Endress+Hauser
<
Temperature head transmitter iTEMP
Table of contents
Installation.........................................................................................page 9
Dimensions......................................................................................page 10
Wiring overview ..............................................................................page 10
Potenzial levelling ............................................................................page 11
Operation ........................................................................................page 11
Accessories ......................................................................................page 13
Supplementary Documentation ........................................................page 13
1 Installation
®
Pt TMT180
Ambient temperature:
-40 to 85 °C (-40 to 185 °F)
Installation area:
Field housing; connection head Form B
accord. to DIN 43 729
Installation angle: No limit
Safety instructions:
The unit must only be powered by a
power supply that operates using an
IEC61010-1 compliant energy limited
circuit: "SELV or Class 2 circuit".
TMT180
en
9