Uline H-6896 Manuel D'instructions page 4

OPTIONAL SHELF
1. Bolt shelf rail at desired level to inside of side panel
outer flange using two longer carriage bolts and two
nuts. Shelf rail will have flush side facing up.
(See Figure 10)
2. Repeat step on opposite side panel.
3. Place first piece of shelf on top of rails with flush side
facing up. Bolt first piece to shelf rails using two short
hex head bolts. Bolts will go through shelf rails and
into threaded holes in shelves.
(See Figure 11)
4. Repeat for the remaining shelf pieces.
NOTE: For 48" deep units, the shelf will be made
up of four pieces and will require eight short
hex head bolts to attach.
PAGE 4 OF 12
OPTIONAL ACCESSORIES CONTINUED
1-800-295-5510
uline.com
Figure 10
Figure 11
1122 IH-6896