Software Programming Guide - modbar pour over system Manuel De Fonctionnement

9. Software Programming Guide

1) Interface:
The touch screen is used for selecting
and displaying data. The multi-function
encoder is used for editing data.
functions of the encoder are shown below:
2) Home screen:
Ready indicator: This square icon indicates
whether the machine is at temperature to
dispense. When first starting the machine,
20
the indicator will remain red in color
until all temperature zones are heated
to set temperature. Once all zones are
The at temperature, the icon will turn green,
indicating that we are now ready to
dispense.
Temperature set value: This is the current set-
point value in degrees for the active heat
zone. The temperature shown here is only
for reference. To change the temperature set
value, refer to the section of this manual
labelled Steps to creating a new pour-over
profile.
Heat zone: In automatic temperature mode,
this button has no function. In manual
temperature mode, pressing this button
cycles through the 2 heat zones on the pour-
over system: Inlet Boiler and Outlet Boiler.
(Refer to Advanced preferences screen)
Settings button: This button navigates to the
main settings screen.
Machine name & status: Displays the current
name and status of the module & tap.
Pour-over profile button assignments: Displays
which pour-over program (profile) is selected
for each of the dispensing switches (L = Left
switch, R = Right switch).
Time read-out: Displays the current time from
the start of the dispensing readout.
Volume read-out: Displays real-time fluid
volume information during a dispensing
cycle.
3) Main settings screen:
Home screen: This button navigates back to
the home screen / dashboard.
Profile menu: This button navigates to the
profile selection menu.
Preferences: This button navigates to the
system preferences page.
File operations: This button navigates to the
file operations page.
System info: This button displays the system
version and software information.