Sharp FP-N25CX Manuel D'utilisation page 13

PREPARATION
2
Filter Installation
1
After the True HEPA Filter
is removed from the plas-
tic bag, place it in the main
unit with the tabs facing
up.
Do not install the filter backwards
or the unit will not operate prop-
erly.
2
After removing the Active
Carbon Filter from the plas-
tic bag, place it on top of
the True HEPA Filter.
Make sure that the tab of
the True HEPA Filter re-
mains visible.
3
Insert the upside tabs of
the Filter Support into the
associated holes of the
main unit.
Next push the bottom side
tabs into the main unit.
4
Fill in the usage start date
on the Date Label, which
can be found on back side
of Front Panel.
Use the date as a guide for the Fil-
ter Replacement schedule.
True HEPA Filter
Tab of the True HEPA Filter
Active Carbon Filter
Holes in the
main unit
Date Label
E-11
Tab
Tabs of the up side
Tabs of the
bottom side
Filter Support