8. [Intentionally left blank]
9. Connection Limit
Company may permit up to 20 computers or other devices to connect via Server Message Block ("SMB") to the
Embedded System to use one or more of the following services of the Product:
(a) File services,
(b) Print services,
This 20-connection limit applies to computers and devices that access the software indirectly through
"multiplexing" or other software or hardware that pools connections. The 20-connection limit does not apply
to other uses of the Product. Unlimited inbound connections are allowed via TCP/IP (Transmission Control
Protocol ("TCP") and the Internet Protocol ("IP")).
10. No Retail Channel Distribution. Embedded Systems containing this Product shall:
(a) be marketed solely to business (including Enterprise Customer) and government entities;
(b) be sold directly by Company or via the Channel to business (including Enterprise Customer) and government
entities;
(c) not be distributed individually to consumer end users; and
(d) not be kept in stock at consumer retailers.
11. End User Interface and Embedded Applications
(a) Company may use the shell included in the Deliverables as the End User interface to support Windows 10
compatible Embedded Applications.
(b) Company must comply with the 'Guidelines for Designing Embedded Systems with Windows 10 IoT
Enterprise' white paper posted on the Partner Portal which may be updated from time to time.
(c) To take advantage of the Windows 10 shell or user interface, Company may add one or more Embedded
Applications that End Users can access and execute via the user interface.
12. Embedded Product Key Entry Activation ("EPKEA")
(a) Company may implement EPKEA to pre-activate the MS Binaries during the Embedded System
manufacturing process.
(b) Company must comply with the following requirements:
(1) Company must comply with all EPKEA requirements contained in the Embedded Activation application
and process documentation located on the Partner Portal.
(2) The Recovery Image for this Product must include EPKEA.
(3) Company shall pay MS, as the Default Charge, an amount equal to 130% of the royalty for this Product
for each Embedded System activated with an EPKEA key lost by Company. MS also reserves the right to
terminate Company's right to implement and distribute EPKEA or immediately terminate this Agreement.
In addition, MS may require Company to re-create Images with a new EPKEA key.
13. Processors
No Embedded System shall be designed to support this Product with more than two Processors. Company shall
not distribute this Product on any Embedded System that supports more than two Processors.
14. 32-Bit and 64-Bit Installations
(a) 32 Bit and 64 Bit. The OPK for this Product includes 32- and 64-bit versions.
(1) If the Embedded System uses a compatible 32-bit processor, Company may only install the 32-bit
version.
(2) If the Embedded System uses a compatible 64-bit processor, Company may install either the 64- or the
32-bit version, or both.
(b) Documentation. For Embedded Systems pre-installed with Product, Company may document the fact
Embedded Systems contain both the 64-bit and 32-bit versions of the Products with the right for End Users
to switch between the 64-bit and 32-bit versions. Any documentation must clearly indicate that the End User
may only use one of these versions at a time and that switching between these versions requires uninstalling
the other version. If End Users choses to switch between the 64-bit and 32-bit versions, End User must
comply with the License Terms of the Product.
(c) Selection Utility. If Company includes both the 32-bit and 64-bit versions in an Embedded System,
Company must include a utility for End Users to select one of these versions. After selection, the utility must
delete the other version.
Recovery. An End User may use Company's Recovery Image to switch between 32-bit and 64-bit versions. If
(d)
an End User of an Embedded System with a compatible 64-bit Processor requests Recovery Image media
with the 32-bit or 64-bit version, Company may provide the media even if that version was not preinstalled
on that Embedded System. Company's Recovery Image and media must be in a format that deletes the other
Guide utilisateur XENTRY Diagnosis Kit 4 - GSP/ORE, version 09/2020 (valable jusqu'à résiliation)
Mercedes-Benz AG, Mercedesstr. 120, 70372 Stuttgart
7 10/1/18
Page 90 sur 118