Table des Matières
Publicité
(b) install the MS Binaries on Embedded Systems. Company shall preinstall the MS Binaries in accordance with
the instructions in the Deliverables. Company shall not change or delete any part of the Product unless
expressly allowed by such instructions.
Such testing and installation shall be conducted only on Company premises by Company employees or Contractors.
Company shall make no changes or deletions to the Product except as expressly permitted in the Agreement or in the
Deliverables.
3. Terminal Services Protocols
Company may use terminal services protocols to enable an Embedded System to connect to and access applications
running on a server. These include Remote Desktop Protocol, Remote Assistance and Independent Computer
Architecture. If Company uses these protocols on an Embedded System, then Company shall not allow any Desktop
Functions to run locally on that system, except for network/Internet browsing functions. Company shall advise its End
Users of this requirement.
4. Product Keys
Company may install and use the Product to develop and test prototype Embedded Systems. Company may use the
test Product Key included in the Deliverables to install the test Images. Any Images installed using the test Product
Key will not function more than 30 days after Company first boots an Image on a prototype system. Company must
use Embedded Product Key Entry Activation ("EPKEA") or Product Key Entry Activation ("PKEA") with Images that will
be distributed.
5. Product End of License. Company's license for the Product ends on the earlier of the date included in the
Product Table, or end of the Agreement.
6. Virtualization
Company may only preinstall this Product configured to run directly on a physical hardware system. Company must
not install this Product within any virtual (or otherwise emulated) hardware system.
7. Use of USB Drive for Embedded Systems
Company may incorporate up to two internal USB Drives into the design of its Embedded Systems under the following
terms:
(a) The USB Drives must be mounted inside the Embedded System.
If Company includes two USB Drives, one of them may be used for recovery purposes only (see Section (e)
(b)
below).
6 10/1/18
Each internal USB Drive must work only on Company's applicable Embedded System and must use commercially
(c)
reasonable authentication of each USB Drive to ensure the foregoing.
(d) Each Embedded System must bear a COA that meets the requirements of the Agreement.
(e) Recovery Image Rights. Company's rights regarding Recovery Images are included in Section 2(f) of the
Agreement. Company may distribute Recovery Images on an internal Recovery Image USB Drive. The Recovery
Image USB Drive must include only the Recovery Image and the Recovery Image USB Drive must not be
rewriteable. (In other words, the internal USB Drive must be "write once, read many".) All other requirements for
Recovery Images remain unchanged.
(f) Replacement USB Drives
(1) Replacement. If Company removes or replaces an internal USB Drive, then Company:
(i)
must destroy the replaced internal USB Drive or refurbish it as provided in Section (f)(3) below.
(ii)
may distribute replacement USB Drives separate from an Embedded System only directly to an
Enterprise Customer (cannot be distributed through Company's Channel partners) for replacement
of existing internal USB Drive. OEM must require an Enterprise Customer to internally mount the
replacement USB Drive in the Embedded System and prohibit any use of the replacement USB Drive
externally. Company must instruct Enterprise Customers to destroy each replaced internal USB
Drive or return it to Company.
(iii)
must distribute replacement internal USB Drives directly to Enterprise Customers at no charge,
except for the reasonable costs Company incur for materials, shipping, and handling.
(2) Royalty. No additional royalty shall accrue to MS for replacement internal USB Drives, provided that:
(i)
Company complies with Section (f)(1) above, and
(ii)
the replaced units are returned or destroyed (as specified under Section (f)).
(3) Refurbishment. Company may repair or refurbish internal USB Drives replaced by Company or an Enterprise
Customer. Company may redistribute those repaired or refurbished internal USB Drives as allowed in this
Section (f). Company must destroy any replaced internal USB Drives that are not repaired or refurbished.
Guide utilisateur XENTRY Diagnosis Kit 4 - GSP/ORE, version 09/2020 (valable jusqu'à résiliation)
Mercedes-Benz AG, Mercedesstr. 120, 70372 Stuttgart
Page 89 sur 118
Publicité
Table des Matières
