emerio ST-121890.1 Mode D'emploi page 6

ST-121890.1
PARTS DESCRIPTION
1. Power light
2. Heating light
3. Handle clip
4. Detaching latch
5. Grill plates
6. Sandwich Plates
7. Waffle plates
BEFORE INITIAL USE
1. Remove all packaging.
2. Clean the toasting surfaces with a soft damp cloth and then dry them.
3. Unwind the mains cable completely.
HOW TO CHANGE PLATES
1. Push and release the detaching latch to remove the cooking plate out.
2. Put the two ends of the desired cooking plate into the small holes of the main body, place the cooking
plate down slowly. Meanwhile, push back the detaching latch with another hand and releasing it into the
slot of the cooking plate.
Warning: always exchange the plates when the appliance has been unplugged and cooled down completely.
OPERATING INSTRUCTIONS
Note: use the grill plates for big sandwiches. Don't grill any meat and vegetables directly on the grill plates.
When initial use, the device may give off a slight odour. This is normal and will not last for long.
1. Connect the appliance to an appropriate socket. The power light will glow to indicate the appliance is switched
on. The heating light will glow to indicate the appliance is heating.
2. Once the temperature is reached, then the heating light will turn off. It means the appliance is ready for use.
3. Open the appliance at the catch.
4. Pour the ingredients onto the lower plate. Be careful not to overfill.
5. Close the appliance, making sure that the catch is engaged.
6. During toasting the temperature regulating thermostat switches off and on again. The heating light also
switches off and on again.
7. After completion of the baking process (approx. 3-6 minutes) open the catch and remove the food with the
help of a flat wooden or plastic spatula. Never use sharp or metal objects (e.g. knives, metal spatulas, etc.) as
this will damage the non-stick coating.
- 5 -
EN