Installation Of Safety Support - Kichler 60 Humble Manuel D'instructions

INSTALLATION OF SAFETY SUPPORT

(required for Canadian installation ONLY)
A safety support cable is provided to help prevent the ceiling fan from falling.
Please install it as follows:
Step 1. Attach the provided wood screw and washers to the ceiling joist next
to the mounting bracket but do not tighten. (Fig. 14)
Step 2. Adjust the length of the safety cable to reach the screw and washers
by pulling the extra cable through the cable clamp until the overall length is
correct, put the end of the cable back through the cable clamp, forming a
loop at the end of the cable. Tighten the cable clamp securely. Now, put the
loop in the end of the safety cable over the wood screw securely.
NOTE: Although the safety support cable is required for Canadian
installations only, it's a good idea to make the attachment with any
installation.
Hanger Bracket
Safety Cable
Attach safety cable
to ceiling joist with
screw and washer
Fig. 14
60" Humble | 11