Nicols DP 615 Guide D'utilisation page 10

6. Push UP ( ) or DOWN ( ), the LCD will show 2. Set channels.
Push ENTER ( ) will show 2. Set Max Out.
Push ENTER ( ) again, show Max Out :( ).
Push UP ( ) or DOWN ( ) will show Max Out :( 0--255).
EXIT ( ).
7. Push UP ( ) or DOWN ( ), the LCD will show 2. Set channels.
Push ENTER ( ) will show 3. Set Fade time
Push ENTER ( ) again, will show: Fade time ( ).
Push UP ( ) or DOWN ( ) will show Fade time :( 0).
EXIT ( ).
Running program in DMX
1. Select DMX mode
2. Push UP ( ) or DOWN ( ), the LCD will show 3. Set Scenes.
Push ENTER ( ) will show 3. Set Fade Time
Push ENTER ( ) again will show Set Fade
EXIT ( ).
3. Push UP ( ) or DOWN ( ), the LCD will show 4. Test channel.
Push ENTER ( ) show 1. Play Show.
Push UP ( ) or DOWN ( ) appear 1. Record.
Push ENTER ( ) again will show channel (1---6).
Push UP ( ) or DOWN ( ) to change channel (1---32).
Push ENTER ( ) to save output.
EXIT ( ).
4. Push UP ( ) or DOWN ( ), the LCD will show 3. Set Scenes.
Push ENTER ( ) will show 1. Play Show.
Push ENTER ( ) will show Play Scenes :( ).
Push UP ( ) or DOWN ( ) to check up save scene.
EXIT ( ).
5. Push UP ( ) or DOWN ( ), the LCD will show 3. Set Scenes.
Push ENTER ( ) will show 1. Play Show.
Push UP ( ) or DOWN ( ) will show 5. DMX Fail.
Push ENTER ( ) again will show Black Out.
Push UP ( ) or DOWN ( ) show Run Record Scene (no DMX or DMX fail running saved scene).
EXIT ( ).
6. Push UP ( ) or DOWN ( ) the LCD will show 3. Set Scenes.
Push ENTER ( ) wi1l show 1.Play Show.
Push UP ( ) or DOWN ( ) will show 4 Fade Time;
Push ENTER ( ) again will show Fade Times :( 0),
Push UP ( ) or DOWN ( ), show (1---100) (fade time in running program).
EXIT ( ).
10