Wall Mounting - THOMSON GE 27906 Guide De L'utilisateur

. Set the ringer switch (on the handset) to ON, and place
the handset in the cradle on the base.
5. The charge/in use indicator turns on, verifying the
battery is charging. The unit will take 0 seconds to
register and verify its security code.
6. Allow the phone to charge for 16 hours prior to first
use. If you don't properly charge the phone, battery
performance is compromised.
CAUTION: To reduce risk of personal injury,
fire, or damage use only the 5-2617 or
5-2748 power adaptor listed in the user's
guide. This power adaptor is intended to
be correctly orientated in a vertical or
floor mount position.

Wall Mounting

If you want to mount the phone on a wall, slip the
mounting holes (on the back of the base) over the wall
plate posts, and slide the unit down into place. (Wall
plate not included.)
16