Using The Rotary Commander - Sony CDX-M9905X Mode D'emploi

Using the rotary commander

You can also control the unit (and optional CD/
MD units) with a rotary commander (optional).
First, attach the appropriate label depending on
how you want to mount the rotary commander.
The rotary commander works by pressing
buttons and/or rotating controls.
S E L
M O D E
D S P L
By pressing buttons
(SOURCE)
Rotate the VOL control
to adjust the volume.
Press To
(SOURCE)
Change the source
(Radio/CD/MD*
on.
(MODE)
Change operation
(Radio band/CD unit*
unit*
(ATT)
Attenuate the sound.
(OFF)*
2 Stop playback or radio
reception/Power off.
(SEL)/(SOUND) (Not available)
(DSPL)
Select the display mode
(This button works as the
SCREEN button).
D S P L
M O D E
S E L
(ATT)
(MODE)
(DSPL)
(OFF)
1 )/Power
1 /MD
1 ).
By rotating the control
Rotate and release to:
– Skip tracks.
To continuously skip tracks, rotate once and
rotate again within 2 seconds and hold the
control.
– Tune in stations automatically.
Rotate, hold, and release to:
– Fast-forward/reverse a track.
– Find a station manually.
By pushing in and rotating the control
Push in and rotate the control to:
– Receive preset stations.
– Change discs during CD (MD) playback*
– Change albums* 3 .
*1 Only if the corresponding optional equipment is
connected.
*2 If your car has no ACC (accessory) position on the
ignition key switch, after turning off the ignition, be
sure to press and hold (OFF) until the display
disappears.
*3 Available only when an MP3 file is played.
continue to next page t
SEEK/AMS
control
PRESET/DISC
control
1 .
39