Care & Cleaning; Storage Guide - FoodSaver VS2100 Serie Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Care & Cleaning
of your Vacuum Sealer
To Clean Appliance:
CAUTION: Remove Power Cord from electrical outlet. Do not
immerse in liquid.
Check Gaskets and around Drip Tray to make sure they are free
from food materials. Wipe off Gasket with warm soapy cloth if
needed. Upper and Lower Gaskets may be removed for cleaning.
Clean with warm, soapy water and allow gaskets to dry before
reinserting in machine.
The Removable Drip Tray makes cleanup easy when small
amounts of liquids are pulled into Vacuum Channel during
vacuum process.
Empty Drip Tray after each use. Wash in warm soapy water or
place on top rack of dishwasher. Check for food residues in Drip
Tray Slot. Clean if needed. Dry thoroughly before reinserting into
appliance.
11
US: www.FoodSaver.com | CA: www.FoodSaver.ca | MX: www.oster.com.mx/foodsaver
VS2100_22EFSM1.indd 11-12
VS2100_22EFSM1.indd 11-12
Remove all food around gaskets
Lift Drip Tray Out

Storage Guide

of your Vacuum Sealer
To Store Appliance:
Clean unit thoroughly as detailed in "Care & Cleaning" section.
After unit has been cleaned and allowed to fully dry, close lid and
push Latch into Store (middle) position. This setting will keep the
lid closed but prevents any undue pressure from being applied to
internal sealing Gaskets of unit.
Always leave Latch in Store position when not in use. Never store
Lid in Operate position as Gaskets may become compressed and the
unit will not vacuum bag.
Consumer Service: US: 1-877-777-8042 CA: 1-877-804-5383 MX: +52 55 5366 0800
Slide Lock Latch to the Store
position to store.
12
2022/2/11 2:17 PM
2022/2/11 2:17 PM

Publicité

Table des Matières
loading

Table des Matières