Amana DC68-02031C Guide D'utilisation Et D'entretien page 6

O
PERATING INSTRUCTIONS
S D
TART THE RYER
After setting the cycle and desired options, press the
Cycle Selector dial to start the dryer.To pause the
cycle, press Cycle Selector dial again.To restart the
cycle, press Cycle Selector dial and the cycle will
resume from the point of interruption.
T D
URN THE RYER
Power Off
Press the Power Off pad to cancel the cycle and stop
the dryer.
E T
STIMATED IME
The display window shows the estimated time remaining
in the cycle after the Cycle Selector dial is pressed.
The estimated time remaining may fluctuate as the cycle
progresses.
C S L
YCLE TATUS
The Drying light will illuminate and remain lit until the
cycle is complete. When the dryer is in the cool-down
portion of the cycle, the Cooling light will illuminate.
If the Wrinkle Prevent option has been selected, the
Wrinkle Prevent light will illuminate. Chasing lights will
appear in the display when Wrinkle Prevent is selected
(select models). See page 8.
When the cycle is complete, "END" or "00" (select
models) will appear in the display until the dryer door is
opened.
If the dryer is paused during a cycle, the indicator lights
will blink until the Cycle Selector dial is pressed.
O
FF
D
ISPLAY
IGHTS
5