Remplacement De Fusibles; Elimination Des Éléments Usés - Conrad Electronic McCrypt DM-19 Mode D'emploi

10. Remplacement de fusibles

Retirez la fiche secteur du mélangeur de la prise de courant.
Eliminez la cause de la défectuosité du fusible (par ex. surcharge de sorties, court-circuit aux sorties ou aux
entrées etc.).
Puis enlevez avec précaution le porte-fusible sous la prise de courant à l´aide d´un outil approprié (un tour-
nevis plat par exemple).
Remplacez le fusible défectueux (250V, 0.5AT, à action retardée) par un fusible neuf de type identique.
Ne pontez jamais un fusible défectueux ! Ne réparez pas un fusible défectueux!
Danger de mort par électrocution, risque d´incendie en raison d´une surcharge ! Ceci
détruit d´autre part le mélangeur.
Insérez le porte-fusible doté du fusible neuf dans le bon sens, rebranchez le mélangeur sur la prise secteur.
11. Elimination des éléments usés
Si le produit est devenu inutilisable, il convient alors de procéder à son élimination conformément aux pres-
criptions légales en vigueur.
46
Never open the appliance. There are no parts inside the appliance that you need to adjust or service. Addi-
tionally, there is the risk of a mortal electric shock when touching electric components.
Only an expert/workshop may conduct maintenance, adjustment or repair work!
The sliders and control dials may not come into contact with contact spray or other lubricants. This might
make them easier to operate but the contact deteriorates, which makes them inoperable. Loss of warranty!
Never operate the appliance immediately after bringing it from a cold room into a warm room. The conden-
sation may destroy the appliance under adverse circumstances. Leave the appliance turned off until it has
reached room temperature. This might take several hours.
thunderstorms may be a risk for all electric appliances. Although the appliance is off, it may become dama-
ged in case of excess voltage in the power lines.
Therefore, unplug the mixing table's power plug from the mains outlet during thunderstorms.
Do this with all other electric appliances in order to avoid damages due to excess voltage.
In commercial institutions, make sure you observe the accident prevention regulations of the commercial
trade organization for electric installations.
In schools, training facilities, hobby and self-help workshops, qualified personnel needs to supervise the
operation of the product.
If you are not certain how to connect the lamp correctly or in case of any questions not covered by
the operating manual, please contact our technical information service or another expert.
23