Control Panel - Ardo WDOI 1063 S Mode D'emploi

7

CONTROL PANEL

DELAYED START / PROGRAMME PHASE INDICATOR LEDS: Before starting the
programme, the progressive lighting up of the leds indicates the selected delay time.
During operation, the LEDS will indicate the programme phase the washing machine
is currently effecting.
DRY: When the DRY option is selected, the washing will be dried by a current of hot
air at the end of the wash phase. The duration of the drying phase is selected by
repeatedly pressing button B. The time depends on the amount of washing loaded,
the type of fabric and the degree of dampness to retain. When this option is enabled,
the no-spin function is disabled. At the same time, the detergent dispenser must not
be placed in the drum as it could melt during the drying phase and damage both the
washing and the washing machine.
ADJUSTABLE SPIN: Button C can be pressed to change the spin speed in line with
the wash programme selected and the type of fabrics. The selected spin speed will
be indicated by the lit LED. To disable the end of cycle spin, select icon " "
N.B.: The maximum spin speed varies according to the model. The spin speed selected
by the programme is that recommended.
PRE-WASH: To carry out a prewash, press button D and add detergent to the ap-
propriate compartment 1. The washing machine will carry out a prewash at 40°C max.
A Prewash is recommended for items soiled with dust, soil, sand or with particularly
resistant stains. See the Programme Table for further information.
TURBO: To reduce the wash time, press the Turbo button (E). The operating param-
eters are automatically regulated to ensure an effective wash and to save time. See
the Programme Table for further information.
Turbo
SKIN CARE: Press button F to activate the Skin Care function. The function will carry
out three extra rinses. The option is recommended for skins particularly sensitive to
the enzymes contained in detergents.
DELAYED START: This function allows the start of the wash cycle to be delayed by
up to 8 hours. Press button G repeatedly until the required delay time is indicated by
the appropriate LED. LED h will fl ash until the wash cycle starts.
START: During the programme and wash options selection phase, the Start LED
will fl ash. To confi rm the selections and start the wash cycle, press "Start" button H.
The LED will light up.
GB
SM2613