8
Programmes
Symbol
Temperature
Heavily soiled white linen and cotton fabrics with organic stains.
Resistant white and coloured fabrics in linen and cotton.
Reference programme according to standard EN 60456.
The special EcoA programme guarantees the best possible results of a
Class A wash efficiency at only 40°C, with maximum energy saving.
Reference programme for Consumer Associations.
The special Jeans programme carries out a delicate wash at 40°C,
which looks after the Denim fibres and at the same time prevents
discolouring. Clothing in faded Denim fabrics will remain as-new.
The Express Wash 20' programme is suitable for refreshing lightly soiled
items in only 20 minutes. Express 20' means saving precious time by
performing a wash cycle at 35°C.
The Wool programme is ideal for washing particularly delicate items labelled as
being "machine washable". The programme looks after the colours and retains
the original texture of the items over time. The programme has been tested and
certified by the Woolmark Company, an Australian company that guarantees the
quality of pure virgin wool through rigorous controls and tests.
The special Mix programme allows different fabrics (cotton, synthetics,
mixed) to be washed together with perfect results.
Delicate items require extra care and are normally washed by hand. The Hand
Wash function treats the wash items with utmost delicacy.
The Dry programme is useful for items that have already been washed and
which need to be dried only. This function is also useful for removing dampness
from items that need to be stored for any length of time. If the washing is very
wet, run a spin cycle before drying in order to save time and energy.
The Rinse programme is useful for rinsing hand-washed items or for
refreshing items that have not been used for a long time.
The spin speed can be regulated for all types of fabrics.
EASY LOGIC: The EASY LOGIC system automatically regulates the wash time and water and power
consumption according to the actual amount of washing placed in the drum. The ½ load function is
therefore redundant in that the EASY LOGIC system automatically sets the wash parameters.
TECHNICAL CHARACTERISTICS
MODEL
Width (cm)
Dimensions
Height (cm)
Depth (cm)
Max. spin speed (rpm)
Water pressure
Electrical connection
Resistant fabrics
Delicate fabrics
The drying times indicated in the table are purely indicative and may vary substantially according to
the type of fabric, the spin speed and the amount of washing loaded.
GB
PROGRAMME TABLE
Type of washing
RECOMMENDED DRYING TIMES
kg. 3,0
iron dry
kg. 1,5
iron dry
Max.
spin
speed (rpm)
Max 800 500
●
●
●
●
●
WDOI 1063 S
59.5
82.0
54.1
1000
0.05 MPa - 1 MPa
see rating plate
120' - 140'
dry
40' - 100'
dry
Max.
Options
load
(kg)
●
●
●
6.0
●
●
●
6.0
●
●
●
6.0
●
●
●
3.0
●
3.0
●
1.5
●
●
●
●
6.0
●
1.5
3.0
●
6.0
6.0
140' - 150'
100' - 120'
SM2613
●
●
●
●
●
●
●