Ase; Default Setting - GE 28301 Mode D'emploi

5. Select Back, if you do not want to deregister.
NOTE: When you complete the deregistration
process, NOT REGISTERED shows on the display.
To use the handset, you must register the
handset.
Select Base
This option allows you to register a handset to more than
one base and select which base it takes the signal from.
The handset can also search for the most suitable base
automatically if Auto Base is selected.
From the HANDSET SETTINGS menu;
1. Use the 6 or 5 button to scroll to SELECT BASE.
. Press the OK (SKL) button to enter the menu.
. Use the 6 or 5 button to scroll to a specific base (1-, Auto
Base).
. Press the OK (SKL) button to save your selection.

Default Setting

This option allows you to return the handset to factory preset
settings.
From the HANDSET SETTINGS menu;
1. Use the 6 or 5 button to scroll to DEFAULT.
. Press the OK (SKL) button to enter the menu.
. Press the OK (SKL) button to confirm the selection.
NOTE: If you select OK, all the settings in the
programmable menu are returned to factory
default setting. You will hear a confirmation
tone.
1