Egistration - GE 28301 Mode D'emploi

Handset Charge Cradle
1. Choose an area near an electrical outlet and place your
cordless telephone on a level surface.
. Plug the AC power converter into the electrical outlet and the
DC connector into the jack on the back of the cradle.
. Place the handset in the cradle. The CHARGE indicator turns
on, verifying the battery is charging.
Allow handset to charge for 16 hours prior to first use. If you
do not properly charge the handset, battery performance is
compromised.
CAUTION: Use only the model 5-2718 power
adaptor that came with this unit. Using other
power adaptors may damage the unit.
Telephone Operation
Power On/Off Operation
The handset is powered on by connecting the battery or if the
handset has been powered down, press and hold the END CALL
button for  seconds.
To power off the handset, press and hold the END CALL button
for  seconds.
Note: If the handset is on the cradle, only the
(speaker) and END CALL buttons are functional.
Registration
YOU MUST REGISTER THE HANDSET TO THE MAIN BASE
BEFORE USE! It is not recommended that handset be
registered again unless absolutely necessary.
10