Ipod ® (Optional); Playback; Searching For A Desired Song - Alpine CDA-9883 Mode D'emploi

®
iPod (Optional)
Rotary encoder
/ /ENT
SOURCE/
/RTN
/ESC
®
An iPod can be connected to this unit by using the proprietary
ALPINE FULL SPEED™ Connection Cable (KCE-422i) (sold
separately). When this unit is connected by using the cable, the controls
on the iPod are not functional.
iPods usable with this unit
• The unit can be used with the fourth generation and above
iPod, iPod photo, iPod minis or iPod nano. iPod Shuffle can
not be used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod versions.
Correct function of earlier versions cannot be guaranteed.
Fourth generation iPod: Ver. 3.1.1
Fifth generation iPod: Ver. 1.1.2
iPod photo: Ver. 1. 2.1
iPod mini: Ver. 1. 4.1
iPod nano: Ver. 1.2
• The unit cannot be used with software versions earlier than "2006-
06-28". For details about "iPod Software Update," refer to the iPod
Instruction Manual.

Playback

1
Press SOURCE/ to switch to the iPod mode.
1
TUNER XM/SIRIUS*
3
CHANGER* TUNER
1
* Only when XM Radio or Sirius Radio is connected.
2
* Only when the iPod is connected.
3
* Only when the CD changer is connected.
2
Press or to select the desired song.
Return to the beginning of the current song:
Press .
Fast backward:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward:
Press and hold .
3
To pause playback, press
/ENT
Pressing / again will resume playback.
• A song playing on the iPod while it is connected to this unit will
continue to play from where it was paused after disconnection.
24
-EN
4 5 6
Preset buttons TITLE
(1 through 6)
2
DISC iPod*
/ /ENT.

Searching for a desired Song

An iPod can contain hundreds of songs. By using file tag information
and keeping these songs organized in playlists, this unit's search
functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlist/
Artist/Album/Song/Podcast/Genre/Composer search mode to narrow
searches based on the table below.
Hierarchy 1 Hierarchy 2
Playlist Song
Artist* Album*
Album* Song
Song —
Podcast Episode
Genre* Artist*
Composer* Album*
For example: Searching by Artist name
The following example explains how an ARTIST search is
performed. Another search mode can be used for the same
operation, although the hierarchy differs.
1
Press /ESC to activate the search selection mode.
2
Turn the Rotary encoder to select the Artist search
mode, and then press
PLAYLIST ARTIST
GENRE COMPOSER
3
Turn the Rotary encoder to select the desired
Artist, and then press
4
Turn the Rotary encoder to select an album, and
then press / /ENT.
Hierarchy 3 Hierarchy 4
— —
Song —
— —
— —
— —
Album* Song
Song —
/ /ENT.
ALBUM SONG PODCAST
PLAYLIST
/ /ENT.