Table des Matières
Publicité
Torque
Before you start the fitting you must check the type plate to determine
which sketch, in the fitting instruction, is applicable.
1. M10x65 (10.9)
*******M* E: 45 Nm
2. M10x35 (10.9)
*******M* E: 75 Nm
3. M10
*******M* E: 75 Nm
4. M12x35 (8.8)
*******M* E: 75 Nm
5. M12x70 (10.9)
*******M* E: 120 Nm
*******M* P: 45 Nm
*******M* P: 72 Nm
*******M* P: 75 Nm
*******M* P: 75 Nm
*******M* P: 105 Nm
© 4013870/25-03-2022/7
Publicité
Table des Matières
