ShelterLogic ShelterCoat 28'W x 16'H Peak Mode D'emploi page 6

5. CONNECT THE FIRST MIDDLE RIB AND INSTALL
WIND BRACES:
Attach Wind Brace (800440) between the end rib and the first middle rib as shown
in Figure 5.
Bolts attached at the cross rails should be inserted facing inside the shelter.
00690
11131
6. CONNECT THE REMAINING RIBS
A. Use Side Rails # 11102 to connect remaining ribs and rear end rib.
B. Use Wind Braces (800440) between the end rib and the last middle rib as shown in Fig. 6.
Fig.6
Fig.5
Page 6
00690
800372
05_GP-AA-XXXXXXA-028XXX16_G1
800454