ShelterLogic ShelterCoat 28'W x 16'H Peak Mode D'emploi page 11

11. INSTALLING THE COVER ON THE FRAME - continued
E. After cover is centered on frame, insert a Cover Rail (#11105) into each pocket on the inside of the cover in
the roof.
F. Use 3-Way (#11106) and 4-Way (#11107) Clamps to connect them to the ribs. Hand-tighten bolts (#11130).
See Figure 11F.
NOTE: To avoid damage to fabric, face bolt heads towards cover.
G. Using cover rails, pull top portion of cover tightly downward and outward from the
center and tighten bolts.
End Rib Cross Rail Clamps
11106
11130
00690
Page 11
Middle Rib Cross Rail Clamps
11107
11130
00690
Fig.11F
05_GP-AA-XXXXXXA-028XXX16_G1
COVER NOT
SHOWN FOR
CLARITY.