shark QSG-LZ602 Guide De Démarrage Rapide

Please be sure to read the enclosed Shark® Owner's Guide prior to using your unit.
QUICK START GUIDE
WHAT'S INSIDE
A
Lift-Away® Pod
B Wand
C Floor Nozzle
D Accessory Holder
ASSEMBLY
Attach the accessory holder
(D) onto the wand and place
accessories on the holder.
D E
Lift the floor nozzle tube, pushing
it firmly until it stands upright,
then insert the wand into the tube.
NOTE: For proper operation, ensure all parts
are firmly CLICKED into place.
LZ602C_QSG_E_MP_Mv1
E
8" Crevice Tool
F Dusting Brush
G Self-Cleaning Pet
Power Brush
A
B
(Snap)
F G
C
UPLIGHT
LIFT-AWAY
When storing, wrap cord
around cord hooks.
For quick cord access,
rotate upper hook down
and remove cord.
EMPTYING THE DUST CUP
Empty the dust cup after each use.
(Click)
BRUSHROLL MAINTENANCE
Brushroll access
The self-cleaning brushroll
automatically removes hair
wrap. If some hair or debris
remains after continued
(Click)
use, remove the cover to
access the brushroll. Use
a coin to turn the locks
counterclockwise, then lift
off the cover. Remove any
debris or hair wrap and
clear the debris intake.
To close, push down the
cover until it clicks into
place, then turn the locks
clockwise.
CORDED
™
VACUUM
®
TIPS
When the vacuum is placed
in the upright position,
the retractable wheels will
extend so the vacuum
can stand up on its own.
MAINTENANCE:
Rinse pre-motor filters
every month and HEPA
filter once a year.
Rinse with cold water
only. Allow filters to
air-dry completely
before reinstalling.
See enclosed Owner's
Guide for more
information on how
to clean and replace
the filters.
clean
Soft Roller
Slide the button on the floor
nozzle to eject the Soft Roller.
Tap off debris and wipe the
roller clean with a dry towel.
© 2019 SharkNinja Operating LLC.