Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
assume any responsibility for problems caused by unauthorized repair or maintenance.
● A few device components (e.g., electrolytic capacitor) require regular replacement. The average lifespan
varies, so periodic checking is recommended. Contact your dealer for details.
● Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
● If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
device may be impaired.
Using Environment
● Make sure the running environment meets the requirement of the device. The operating temperature shall
be -10°C to 50°C (14°F to 122°F), humidity shall be 90% or less, and height ≤5000 m.
● Place the device in a dry and well-ventilated environment.
● DO NOT expose the device to high electromagnetic radiation or dusty environments.
● DO NOT aim the lens at the sun or any other bright light.
● When any laser equipment is in use, make sure that the device lens is not exposed to the laser beam, or it
may burn out.
Emergency
● If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and
contact the service center.
Laser
Address
SEFRAM, 32 Rue Edouard Martel, BP55, 42009 St Etienne - France
04 77 59 01 01 /
sales@sefram.com
Warning: The laser radiation emitted from the device can cause eye injuries, burning
of skin or inflammable substances. Before enabling the Light Supplement function,
make sure no human or inflammable substances are in front of the laser lens.
Publicité
Table des Matières
