RCA RCU1010RF Mode D'emploi page 34

RCU_1010_RF_IB_RevA.qxd
All manuals and user guides at all-guides.com
Troubleshooting
PROBLEM
Your component does not respond but the red
light inside the Remote Sender Cone lights when
a key is pressed on the RCU1010RF remote
control unit.
34
9/24/03 10:31 AM Page 34
SOLUTION
Make sure the Remote Sender Cone is within
•
20 feet (6.096 meters) of your component(s).
Check to be sure the front (logo side) of the
•
Remote Sender Cone is pointing at the front
of your component(s).
When trying to control multiple components
•
behind a closed door (entertainment center),
experiment with placement of the Remote
Sender Cone. In most cases, you will be able
to find correct position of the Remote Sender
Cone so that you will not need to use the
IR Extender.
Make sure there is nothing blocking the
•
Remote Sender Cone and the component(s).
If something is blocking the signal, attach
the IR Extender (See page 5 for information
on setting up the IR Extender.)